Welcome to 33 years of experience. Call a sales staff with years of field experience before answering your phone or email request. Engineering also comes from hands-on plant experience. You will receive fast and competent belting information rightnow.
We will solve your high temperature conveyor belting problem. We use Viton® and Nomex® plys under Insulglass covers which handle molten glass. We are excellent with extruders and annealing. Try us for u.v. coating and drying situations—you will find knowledgeable staff with 30 years in an ever-changing field.
We use Kevlar®, Nomex®, glass, and Teflon® for heat transfer belts and laminating operations.
Contact us for help in solving your problems. Our quality is unexcelled, delivery is fast and belt life is superior. Talk to those who know.
New! Use our Online Worksheet to send us your detailed belting specifications.
Belts up to 118" wide in any length. Available in over 70 weights and widths our superior non-stick and mirror-smooth surface is essential. The operating temperature range is from -100°F to +550°F. The non-toxic, tasteless and odorless qualities of the coating make it appropriate for use in food handling operations, as well as, other applications such as:
Conveyorized cooking and food processing
Conveyorized tortilla presses
Conveyorized garment fusing presses
Conveyorized packaging - such as over wrapping, tray wrapping and end sealing machines
Open mesh Teflon® PTFE impregnated fiberglass belting is available in brown or with a black U.V. block coating in widths up to 118" and any length. The fluorocarbon resins used in the curing process are chemically inert, and the woven glass substrate provides exceptional strength and dimensional stability. Its non-stick surface, operating temperature range from -100°F to +550°F and the 70% open area makes this belting the perfect solution for many drying applications such as:
Conveyorized screen print dryers
Conveyorized belts for drying textiles
Conveyorized belts for side and base sealing auto pack machines
Conveyorized belts for resoldering and ink drying cable braiding
Fabricated out of our Silicone/Glass fabric this belting is available in white or red, coated one or both sides, in widths up to 36" and any length. It provides excellent release properties, high dielectric strength, wear and flexing resistance and high chemical resistance. The operating temperature range is from -100°F to +500°F. The non-toxic, tasteless and odorless qualities of the coating make it appropriate for use in food handling operations, as well as, other applications such as:
To assure the best performance and accurate tracking, we recommend that wherever possible belts be ordered with splices. We offer all the standard splices. Please call (800-540-1846) our technical service department to discuss which splice would be best for your specific application.
Heat Sealed Overlap
This is the standard splice for most applications. The belt ends are overlapped from 1/2" to 2" then heat sealed. For additional strength the splice can be stitched.
Heat Sealed Butt
This splice is perfect in applications where a smooth belt surface is required.
The ends of the belt are butted together. A reinforcement fabric is positioned beneath the joint and then heat sealed into place. For additional strength this splice can also be stitched.
Finger Splice
This splice provides an excellent continuous release surface. Die Cut interlocking fingers are joined, reinforced and heat sealed into place.
Alligator/Clipper Splice
This is an exceptionally strong metal splice. Metal lacing is meshed together and joined by inserting a metal pin. This provides a flexible splice and enables the belt to be installed without taking the machine apart.
Fabric Pin Splice
Similar to the Alligator/Clipper splice but without any metal components.
Edge Reinforcement
For the many applications that require edge protection, GBI can heat seal and/or sew a reinforcement strip of fabric or film to one or both edges of our belts. This not only protects the edges from wear and abrasion but also serves as an anchor for tracking aids.
Splice Protection
GBI can heat seal and/or sew a cover flap over the Alligator/Clipper splice. This prevents the metal lacing from contacting the product being conveyed and provides a continuous release surface.
Tracking And Guiding
GBI belts can be supplied with guiding pins, grommets or silicone tracking guides on one or both edges. This helps assure accurate tracking and promotes increased belt performance. The pins and silicone tracking guides are designed to fit into the grooves cut into the pulleys.
All GBI belts are best driven by metal rollers. For large belts we recommend lagging the drive rollers with soft rubber. To assure best performance, belt tension should be kept to a minimum.
Recommended Minimum Pulley Diameters
Belt Thickness
Belt Width Up to 12"
Belt Width 12" to 30"
Belt Width 30" to 60"
Belt Width 60" and over
.005" to .010"
3"
6"
8"
10"
.011" to .019"
6"
6"
8"
10"
.020" to .025"
8"
8"
8"
10"
.026" to .030"
10"
10"
10"
10"
FLUOROFAB(tm) is a registered trademark of Green Belting Industries Ltd.
Kevlar®, Nomex®, Silverstone®, Teflon® are registered trade names of DuPont Company.
All information contained on this web page is owned & copyrighted by Greenbelt Industries, Inc.
