|
Grade I Premium is a premium RMA Grade I compound formulated for use in very high abrasion applications where more belt abuse will be prevalent. Legg Company's GI-P is formulated to exceed the requirements of the RMA. It is a blend of SBR and natural rubber and is an excellent compound. | Back to Compounds
MOR (Moderately Oil Resistant) is a moderately oil resistant version of the XT-GII compound. It maintains the qualities of the XT-GII while giving a secure level of oil resistence. With a 75% oil swell, it has a higher degree of oil resistance than you will find in many of MORs. | Back to Compounds
OR (Oil Resistant) is an oil resistant compound with an oil swell of 35%. it is designed for applications where more oil resistance is needed than an MOR, but not a degree of oil resistance to justify the expense of pure Nitrile compound. It should be noted that with the increasing level of oil resistance a compound may lose some of its abrasion resistance and other properties may be affected. | Back to Compounds
VOR (Very Oil Resistant) is pure Nitrile compound that has maximum oil resistance. It is used where there is an excess of oil or oily products are being conveyed. | Back to Compounds
MOR SC FR The Grain Handler is engineered for use in the grain elevator industry or where a static conductive and/or fire retardant belt is needed. Grain Handler is a moderately oil resistant compound used for conveying whole grains such as corn and wheat. It is not recommended for handling oil seeds such as canola or shelled sunflowers. | Back to Compounds
OR SC FR The Grain Handler Plus is designed for use in the grain industry where a higher degree of oil resistance is needed. These applications would include the handling of oily seeds such as canola and shelled sunflowers. It is not recommended for use in crushed canola applications or where oily liquids are prevalent. | Back to Compounds
VOR SC FR The Grain Handler Supreme isi a compound formulated for oilier applications in the grain industry. The 10% max. oil swell of the GHS's pure Nitrile composition makes it ideal for applications such as the conveying of crushed canola. The GHS is also well-suited for use with mineral oil dust-supression systems. | Back to Compounds
MSHA is a compound which must meet the requirements of the U.S. Bureau of Mines 2G flame-retardant test. It is largely used for below ground mining applications where the risk of fire entrapment is predominant. | Back to Compounds
High Heat is an EPDM that offers very good to excellent heat resistance with temperatures ranging to 400° F. It also offers outstanding ozone and oxidation resistance as well as very good abrasion resistance. This makes for an ideal compound for many applications. Handling high temperature products in outside environments or high temperature handling of very abrasive products. | Back to Compounds
Heat and Oil Resistant is a high heat NBR formulated to withstand the high temperatures and heavy oils of the asphalting industry. It offers excellent abrasion characteristics for an NBR, while maintaining the oil resistance required. With a temperature range up to 350° F it will handle your asphalt needs. it should be noted that with this compund the high temperature is only achievable when heavy oil is present. This belt is not rated above 225° F when light or no oil is present. | Back to Compounds
CBXNBR (Carboxilated Nitrile) is one of the toughest compounds around. It offers excellent cut and gouge resistance and excellent abrasion resistance. Its uses range from corrugated boxes to scrap iron. In addition to its toughness, it offers excellent oil resistance to most oils. Available in several colors. | Back to Compounds
SBR (White Food Grade SBR) is an FDA-approved compound for use in handling consumable food products. It is an SBR so it gives good abrasion resistance considering there is no carbon black. It can be used for non-oily p roducts such as sugar, dehydrated potatoes, and flour, just to name a few. | Back to Compounds
WFG NBR (White Food Grade Nitrile) is an FDA-approved compound for use in handling consumable food products with high oil content. It has good abrasion and cut and gouge resistance in addition to its oil resistance. A pure Nitrile, it gives the highest level of oil resistance for oily products such as meat, soy bean meal, pre-cooked potato products, and shelled nuts, to name a few. | Back to Compounds
TPB (Tan Pure Gum) is a very, very tough compound, with an exceptionally high coefficient of friction. Used where very high cut and gouge resistance, combined with a high demand for gripping the material, is a must, and where abrasion is a factor. It is a non-marking compound which makes it ideal for the timber products industry. This compound is so incredibly tough with such exceptional grip, you'll wonder how you ever got by without it. | Back to Compounds
TNMSBR (Tan Non Marking SBR) is a tan non-marking SBR. it has good tear and good abrasion resistance. A great belt for handling products where marking is not permitted. Ideal in many markets, such as paper handling, finished aluminum parts, planers, sanders, lumber, packaged goods, and light conveying field. A agreat coefficient of friction to grip your product even at steep inclines, without the cost of the TPG. | Back to Compounds
|
